PW7 Rake-Up Combine Pick-up
PW7 Pick-up header features
- New header mounting allows the auger to be mounted closer to the feeder chain for better feeding.
- Single point hook up for hydraulics, electrical and locking pins.
- Left-hand PTO hook-up.
- PTO shafts come with radial pin clutch.
- Chain tension is adjusted by moving PTO drive, eliminating the chain tension idler.
- Replaceable floor panel.
- Ultra float suspension system carries and supports pick-up.
- Durable polyethylene side safety shield.
- Finger timing and auger chain tension can get adjusted without removing side shields.
Swathmaster™ Series IV features
New features and design for improved performance, reliability and operator convenience.
- Front belt rear roller middle support, now standard on the 16′ model to greatly reduce belt slippage.
- Orbit motor on front belt for direct pull, with self-tightening V-belt drive of rear belt.
- New wheel height adjustment and new large 20 x 10 – 10 flotation tires along with ultra float suspension for improved stability, reduced wheel bounce and reduced ground pressure.
- Reduced number of grease points.
- Draper roller mounting position reduces grain loss and back feeding.
- Hydraulically operated crop hold-down.
- High quality plastic fingers are standard, steel teeth are optional.
PW7 Pick-up header specifications
|Header Size||13 ft. (4 m)||15 ft. (4.6 m)|
|Weight||1,550 lbs. (703 kg)||1,600 lbs. (726 kg)|
|Overall Width||171 in. (4 343 mm), 192 in. (4 877 mm) with clearance lights||190 in. (4 826 mm) 211 in. (5 359 mm) with clearance lights|
|Overall Height||45 in. (1 143 mm) with clearance lights||45 in. (1 143 mm) with clearance lights|
|Overall Depth||35 in. (889 mm)||35 in. (889 mm)|
|Header Opening Width||154 in. (3 912 mm)||173 in. (4 394 mm)|
|Auger Diameter||24 in. (610 mm)||24 in. (610 mm)|
|Auger Fingers||0.625 in. (16 mm) induction hardened, 18 – 24 fingers (depending on machine)|
|Auger Speed||150 – 217 RPM (depending on combine)|
|Drive Shaft||Heavy duty, fully shielded with built-in clutch|
Rake-up™ IV specifications
|Header Size||14 ft. (4.27 m)||16 ft. (4.88 m)|
|Number of 19 in. (482 mm) Draper Belts||8||9|
|Actual Picking Width||154 in. (3 912 mm)||175 in. (4 445 mm)|
|Overall Height||169 in. (4 293 mm)||188 in. (4 775 mm)|
|Overall Depth||1,450 lbs. (657.7 kg)||1,600 lbs. (725.7 kg)|
|Header Opening Width||204 in. (5 182 mm)||223 in. (5 664 mm)|